Receive a free quote using our Ultra High Density Interconnect Builder. This interactive application provides step-by-step instructions to build a UHD Interconnect Assembly.
GORE® Ultra High Density (UHD) Interconnects provide an integrated system of board-mount headers and ganged cable assemblies with reliable signal integrity performance. Cost savings are achieved through shorter test set-up, fewer calibrations, and smaller boards. GORE® UHD Interconnects enable lower loss, lower skew, better impedance control, and shorter board trace lengths.
GORE® UHD Interconnects can be configured on-line to meet specific application requirements.
The cables are constructed with Gore’s ePTFE dielectric that provides lower relative losses. GORE® Low-Loss UHD Cable Assemblies utilize our low-loss coaxial cable with UHD-S, UHD-P, and SMA-P connectors. For additional bandwidth, GORE® High-Frequency UHD Cable Assemblies utilize our ultra low-loss coaxial cable and precision UHD connectors to support up to 10 Gigabit data rates with performance up to 15 GHz.
GORE® UHD Cable Assemblies are available as single lines or ganged assemblies (2-, 4- or 8-position housings) for easier handling, quick connect/disconnect, and better cable management. A 10 ps relative time match is standard for all ganged GORE® UHD Cable Assemblies.
Assembly Options | Max Data Rate |
Max Frequency | Insertion Loss |
---|---|---|---|
Low-Loss Cable Assembly | 4 Gb | 6 GHz | 0.90 dB/ft. @ 6 GHz (2.95 dB/m @ 6 GHz) |
High-Frequency Cable Assembly |
10 Gb | 15 GHz | 1.23 dB/ft. @ 15 GHz (4.04 dB/m @ 15 GHz) |
Property | Value |
---|---|
Frequency rating | 15 GHz |
VSWR rating (typical) | < 1.25:1 through 6 GHz |
Velocity of propagation (Vp) | 85 ±2% |
Voltage rating | 350 V DC |
Current rating - signal | 9 A DC |
Current rating - shield | 9 A DC |
Current rating - UHD | 3 A DC at 50°C |
Insulation resistance | 100M ohm at 500 V AC |
TDR impedance reflection | < ±2.5 ohm at 75pS < ±2.0 ohm at 180pS < ±1.0 ohm at 250pS |
Crosstalk | < 0.5% through 3 GHz |
RF leakage- connectors | 60 dB min through 6 GHz 70 dB min through 2 GHz |
RF leakage- cable | 80 dB min through 6 GHz |